Passenger elevators are manufactured with load capacity of 225, 300, 320, 400, 500, 630, 1000, 1275 kg and speed movement up to 2 m/sec.

They are designed with the upper and the lower machine room for an installation in the dwelling houses, administrative and residential buildings, hotels, banks and offices.

Seismic execution of passenger elevators is possible

The elevators described are featured by:

Common capacities outside the US include the following:

The manufacture of elevators for transportation fire brigades has been launched. They are equipped with fire-resistant shaft doors as well as a hatch in the ceiling with the dimensions of 700x500 mm. The operation of these elevators is provided in the ordinary mode as well as in the "Transporting the Fire Brigades" mode; in the last case the elevators is controlled from the cabin by the fire brigade itself.

lanco manufactures elevators for the transportation of passengers in wheel-chairs (width of doorway is 900 mm) and passengers in dwelling houses and social housing. The manufacture can produce passenger elevators equipped with telescopic doors (width of doorway is 650, 700, 800, 900, 1000, 1100, 1200 mm).

lanco has developed the production of elevators without machine room with load capacity of 400, 630, 1000 kg and movement speed 1,0 m/sec equipped with direct-drive winch, stationed under elevator shaft floor.

The new range of passenger elevators without machine room with load capacity of 400, 630, 1000 kg with direct-drive winch in axis version in upper part of elevator shaft is currently developed.

Speed

Generally passenger elevators in buildings with eight floors or less are hydraulic or traction, which can reach speeds up to 200 ft/min (1.0 m/s) hydraulic and up to 500 ft/min traction. In buildings up to ten floors, traction and gearless elevators are likely to have speeds up to 500 ft/min (2.5 m/s), and above ten floors, speeds begin at 500 ft/min (2.5 m/s) up to 2000 ft/min (10 m/s).